How It Works

Using the DryCASE is as Easy as 1-2-3!

1. Slide in your device

Twist the clasps outward to open the DryCASE, and then simply slide in the device that you would like to protect.

HowTo1

2. Lock the closure shut

Twist the clasps inward to close and lock the DryCASE. Position your device how you would like to use it inside the DryCASE. When you remove the air creating a vacuum it will secure the device in place.

HowTo2

3. Pump out all the air

Simply squeeze the pump until you have removed all the air and can’t pump it any more. After you have removed all the air the DryCASE should be tightly sealed around the contents inside and the pump should be completely flat. You can now remove the hand pump and place the safety cap on.

HowTo3


Tips for Optimum Performance

 

  • If you want the DryCASE to be buoyant, simply attach the included flotation armband.
  • In addition to the hand pump you can also remove the air from your device by using your mouth. Simply place your lips on the valve and evacuate the air until the case is completely sealed.
  • The first couple of times you use the DryCASE it may stick to your device when sliding it in. Simply fold a piece of paper in half and slide the device into the DryCASE inside the folded paper.
  • One of the great features of DryCASE is that it’s completely clear on both sides. Not only do you have full use of your touch screen or keyboard, but you can take photos as well. Turn on your camera if you have a lens that expands before placing it in the DryCASE and creating the vacuum seal, and start taking photos!

Components_DC-13